Hegenscheidt HP-165 CNC Portal Wheel Lathe

The Hegenscheidt HP-165 Portal Wheel Lathe is a high production CNC wheel reprofiling machine that is easy to operate and maintain. Its portal design allows for wheel sets to roll through the lathe on shop rails. The mechanical elements and drive system are designed for cutting performance up to 32 mm² / 1.25 in² per tool post. This allows for a short floor-to-floor time for reprofiling, even for extreme wheel wear conditions.

Hegenscheidt Portal Wheel Lathe for wheel set production

The lathe’s working area is fully enclosed, protecting the operator from chips. The turning tool posts and tool post guides are located above the wheel set. The wheel set drivers consist of a faceplate designed as a chuck and a sleeve on each side. Every faceplate is driven via its own, continuously variable motor with gearbox. The large center sleeves with integrated center point clamping are guided free of play and clamp the wheel set axially. The lathe includes automatic measuring probes that communicate measurement results directly to the CNC-based control system, ensuring an accurate cut where the least amount of metal is removed. The control system is accessed via a railway-specific graphical user interface that requires no programming knowledge on the part of the operator.

Machine Specifications

Download our Hegenscheidt HP-165 CNC Portal Wheel Lathe product data sheet — for the full machine specification, please contact the Machine Sales team.

Machine Footprint (L x W x H)

11.81 x 30.19 x 11.49 ft. | 3.6 x 9.2 x 3.5 m

Pit Dimensions (L x W x H)

27.89 x 36.09 x 11.49 ft. | 8.5 x 11 x 3.5 m

Machine Weight

125664 lbs. | 57000 kg

Rated Power

350 KVA

Maximum Wheel Tread Diameter*

*Pending engineering review
49.21 in. | 1250 mm

Minimum Wheel Tread Diameter*

*Pending engineering review
13.78 in. | 350 mm

Maximum Axle Load

40466 lbs. | 180 kN

We're here to help

The NSH USA Customer Service Center (CSC) is here to support you and your machine. As the original equipment manufacturer (OEM), we are ideally suited to keep your machine productive and operating safely.

We offer:

OEM Spare & Replacement Parts
New or Upgrade Services
Service & Inspections
Training

Already have a Hegenscheidt HP-165 CNC Portal Wheel Lathe?

Contact Simmons Customer Service Center today for support.

Interested in a Hegenscheidt HP-165 CNC Portal Wheel Lathe?